Steel Locker - 3 Tier 3 Unit Wide

Sloping Top Kits

Features:
• Converts standard 5000 Series Lyon Lockers into sloping-top lockers quickly and easily.
• Kits are packed either three wide or bulk quantity of 40.
• A package of 3 consists of : three sloping tops, two ends (L & R), two interim supports, hardware and assembly instructions.
• Bulk packages consist of: 40 sloping tops, 40 interim supports, hardware and assembly instructions.
• Bulk pack ends must be ordered separately.
• Choose Dove Gray, Putty or Wedgewood Blue - Please specify color when ordering.

Sloping Top Filler Panels

Used to close space between two sloping tops when obstruction prevents flush installation of adjacent lockers. Choose Dove Gray, Putty or Wedgewood Blue. Please specify color when ordering.

Front Filler Panels

Used to close space between locker sections when obstructions prevent flush installation of adjoining lockers. Choose Dove Gray, Putty or Wedgewood Blue. Please specify color when ordering.

Number Plates

Etched black figures on aluminum plate - 2 3/4"W x 1"H. For use on single, double and multiple tier lockers, and on basket racks and baskets. Numbers stocked from 1 to 1000.

Closed Style Bases

Locker rooms take on a neater appearance and become easier to keep clean when Lyon Closed Bases are used. Quickly attach them without tools for a classy, upscale look. Choose Dove Gray, Putty or Wedgewood Blue. Please specify color when ordering.

Flat Key Locks

Easy to install and furnished with two keys.

Master-Keyed Combination Padlock

Master-Keyed Combination Padlock

Built-in Master-Keyed Combination Lock

Built-in Master-Keyed Combination

Safe-O-Mat Coin Operated Lock System

Features:
• A coin-deposit locking system for facilities that desire self-service temporary locker storage, using conventional-style lockers.
• Ideal for student unions, employee lounges, health clubs, shopping malls. etc.
• Designed to be installed in the same manner as a built-in combination lock.
• Can be retrofitted to most existing lockers.
• Available from manufacturing schedules only

Locker Foot for Lockers with Legs

When backs are exposed (free-standing) a locker foot is recommended for all locker legs. When backs are against a wall and suitably wall anchored, locker feet are recommended on front legs only.

Anchoring Angle for Lockers without Legs

Locker Anchoring Angles (running from front to rear on the inside bottom of the locker) provide a bearing surface for the fasteners which are connected to the floor or locker base. For the typical continuous-row locker installation, order one locker anchoring angle for each end of a row, plus sufficient quantity to provide angles on 36" centers. On single-row installations where backs are against a wall, lockers should be suitably wall anchored.